Product Datasheets
17 products found
Download all datasheets in a zip file
Transacryl Finish - TO3.53
A non-yellowing, acrylic based topcoat with superior adhesion to Transpoxy, Transvinyl and Transoprene anticorrosive systems. The product is easy to apply, dries quickly and offers excellent colour retention.Volume Solids | Approx. 45% |
Product Datasheet
Transobox Acrylic Finish - TO83.89
Modified acrylic finish for interior- and exterior sections of containers. The product has excellent weathering resistance. Approved by Konstandt Laboratories when used with in combination with Transobox Epoxy Zinc Primer 81.79.Volume Solids | Approx. 44% |
Product Datasheet
Transobox Coating - TO82.84
A one coat system combining priming and finishing qualities for easy and refurbishment of containers. Corrosion protection is provided by non-toxic anti-corrosive pigments dispersed in synthetic resins. Can be recoating with various finishes including 2-pack products.Volume Solids | Approx. 50% |
Product Datasheet
Transobox Epoxy Zinc Primer - TO81.79
A zinc rich, epoxy primer formulated to give quick drying in order to be used with automatic spray equipment. The product can be overcoated with various Transobox Finish products. Coating systems with Transobox CR Finish 83.79 or Transobox Acrylic Finish 83.89 are approved by Konstandt LaboratoriesVolume Solids | Approx. 55% |
Product Datasheet
Transobox Unikote - TO82.45
A one coat system combining priming and finishing qualities for easy and refurbishment of containers. Corrosion protection is provided by non-toxic anti-corrosive pigments dispersed in water repelling chlorinated rubber resins.Volume Solids | Approx. 48% |
Product Datasheet
Transobox Uniprimer - TO81.84
A quick drying alkyd primer pigmented with zincphosphate and auxiliary non-toxic pigments for an excellent protection of steel structures against corrosion in industrial and marine environments. Suitable for rapid refurbishment of containers. Can be used down to -15°C for minor repairs.Volume Solids | Approx. 50% |
Product Datasheet
TransTower Alkyd 1 coat - TO8100
An air-drying urethane finish pigmented with anticorrosive pigment and micaceous iron oxide. The lamellar pigmentation, high volume solids and high degree of thixotropy ensure the application of high film weights. TransTower Alkyd 1 Coat has been formulated to be moisture tolerant to enable application in wet/dry conditions such as found after early morning dew or light showers. The coating is designed for use on structural steel, such as transmission towers, tanks, bridges, gantries etc. Complies to EA Technology Specification for a Single Coat Alkyd based Paint for Overhead Line Towers, for use by UK Electricity Companies. (Project no 76410) EATL/TSC/A December 2010Volume Solids | Approx. 50% |
Product Datasheet
TransTower Alkyd Finish - TO8149
An air-drying urethane finish pigmented with micaceous iron oxide. The lamellar pigmentation and high degree of thixotropy ensure the application of high film weights. TransTower Alkyd Finish has been formulated to be moisture tolerant to enable application over TransTower Alkyd Primer in wet/dry conditions such as found after early morning dew or light showers. Complies to EA Technology Specification for Urethane Alkyd Two Coat Paint System for Overhead Line Towers for use by UK Electricity Companies. (Project no 71220) EATL/T67 December 2006Volume Solids | Approx. 50% |
Product Datasheet
TransTower Alkyd Primer - TO8044 - 1
A high build anti-corrosive primer based on a urethane alkyd resin system, pigmented with non-toxic pigments, fillers and zinc phosphate with lamellar micaceous iron oxide to improve inter coat adhesion and non-slip properties. Designed for use on structural steel, such as transmission towers, tanks, bridges, gantries etc., where high build is a particular requirement. Complies to EA Technology Specification for Urethane Alkyd Based Two Coat Paint for Overhead Line Towers ,for use by UK Electricity Companies. ( Project no 71220) EATL/T67 December 2006.Volume Solids | Approx. 48% |
Product Datasheet
TransTower Aquafinish - TO8120
An air-drying waterbased finish pigmented with micaceous iron oxide. TransTower Aquafinish is designed to be moisture tolerant to enable application over TransTower Aquaprime in damp conditions similar to those found in early morning dew or after light showers. The high build properties and lamellar pigmentation ensure a high degree of protection against erosion due to weathering. Approved by National Grid for application to transmission towers.Volume Solids | Approx. 49% |
Product Datasheet
Page 1 of 2.
Next page